PACON 5000 is a compact, easy-to-operate and high accuracy water qualityanalyzer provided by JENSPRIMA for automatic on-line inspection of water quality residual hardness and quality control of water softening processes.

The PACON 2501 on-line residual chlorine analyzer is an accurate, cost-effective and low-maintenance instrument for continuous on-line monitoring of residual chlorine

The Flumsys 10TC-C6 single channel controller is designed for the measurement of a range of water quality parameters relevant to the water treatment industry. It can measure conductivity or concentration, with preset conductivity/concentration curves for acid and alkali salts such as H2SO4, HNO3, HCl, NaOH, NaCl, etc., and automatic temperature compensation. a 4.3-inch color LCD display, touch operation, and very easy setup. This series controller has data storage function, support U disk data export. Provides three programmable relays and two 4-20mA outputs for controlling auxiliary equipment. Modbus RTU (RS485) communication is standard.

The innoCon 6800 plus intelligent controller is designed for water treatment and industrial process monitoring, with Chinese/English menus, automatic temperature compensation, two 4-20mA/RS485 Modbus RTU and Hi/Lo alarm outputs as standard, panel and wall mounting. Different water quality parameters can be measured by selecting different innoSens electrodes.

The innoCon 6501 basic controller is designed for water treatment and industrial process monitoring, with Chinese/English menu, automatic temperature compensation, 1 channel 4-20mA/RS485 Modbus RTU and Hi/Lo alarm output as standard, and panel embedded installation. Different water quality parameters can be measured by selecting different innoSens electrodes.

SCD-6000 Streaming Current Detector continuously measures ionic and colloidal charge, which indicates coagulant dosage in treated water.

innoSens 450 Dissolved Oxygen

T7:range：0.0-30.0g/L