High Quality pH Sensor FAQ: innoSens 130 Specifications, Ordering and Support Questions

The innoSens 130 is a high quality pH sensor engineered by JENSPRIMA INSTRUMENTS LIMITED for continuous online water quality monitoring in demanding industrial environments. Whether you are evaluating the sensor for wastewater treatment, pharmaceutical production, or food processing, the answers below draw directly from published product documentation.

Specifications & Measurement

What parameter does the innoSens 130 measure, and what is its range?

The innoSens 130 is an electrochemical composite electrode that measures pH value. Its documented measurement range is 0–14 pH, covering the complete acidity-to-alkalinity scale required for industrial process control and environmental compliance.

How precise is the innoSens 130 compared to a standard pH sensor?

The innoSens 130 is high-precision. Its advanced electrode design is specifically engineered to minimize signal drift over extended operation cycles, delivering consistent readings that reduce the need for frequent manual adjustment. Its measurement drift is ultra-low, compared to the high drift of standard sensors.

What is the expected service life of the innoSens 130?

According to the published Investment Return Comparison, the innoSens 130 is rated for 18–36 months, versus 6–12 months for a standard pH sensor. This longer service life, combined with reduced calibration frequency and minimal downtime, results in a lower total cost of ownership.

Compatibility & Integration

Which controllers and analyzers is the innoSens 130 compatible with?

The innoSens 130 is confirmed compatible with pH/Redox controllers, including the Flumsys 10TC and innoCon controllers. It also integrates with multi-parameter water quality analyzers. The product is described as fully compatible with standard pH controllers for seamless integration into existing water analysis systems.

Can the innoSens 130 work with third-party pH controllers?

The product documentation describes the innoSens 130 as compatible with standard pH controllers broadly. Buyers with specific third-party controller requirements should confirm compatibility directly with JENSPRIMA INSTRUMENTS LIMITED before placing an order.

Calibration & Maintenance

How often does the innoSens 130 need to be calibrated?

For most industrial applications, monthly or quarterly calibration checks are typically sufficient. This is a significant reduction compared to standard sensors, which typically require weekly calibration. Actual frequency may vary depending on your water chemistry.

What maintenance does the innoSens 130 require day to day?

The innoSens 130 is low-maintenance. Its advanced electrode design reduces signal drift, while integrated sensor health diagnostics monitor wear and calibration status. Auto-calibration routines can be triggered via connected pH controllers, further reducing manual intervention.

Application Suitability

Which industries is the innoSens 130 designed for?

The innoSens 130 is used in wastewater treatment, pharmaceutical manufacturing, and food processing industries, as well as any online water analysis application where precise pH measurement is critical for process control and environmental compliance. It is built with corrosion-resistant, industrial-grade materials.

Can the innoSens 130 be used in high-temperature water environments?

The innoSens 130 is designed for industrial use. However, the product documentation does not confirm specific temperature ratings for particular process fluids — it recommends checking the temperature specifications for your unique process fluid before deployment to ensure maximum sensor longevity. Contact JENSPRIMA INSTRUMENTS LIMITED directly for guidance on your specific operating conditions.

Remote Monitoring & Platform Features

What remote monitoring and data management capabilities does the innoSens 130 support?

When connected to a compatible management platform, the innoSens 130 supports:

• Sensor diagnostics — integrated health checks to monitor wear and calibration status
• Remote configuration — adjust measurement parameters via connected pH controllers
• Alarm management — instant notifications when pH levels exceed predefined safety thresholds
• Data logging — continuous archival of pH trends for environmental reporting and auditing
• Multi-point control — synchronize multiple innoSens units across a single industrial network
• Auto-calibration — automated routines to maintain sensor accuracy without manual intervention

Ordering & Support

How do I order the innoSens 130 or request a quotation?

You can view full product details and submit an inquiry directly on the innoSens 130 product page at JENSPRIMA INSTRUMENTS LIMITED's website. For technical questions or custom application requirements, contacting JENSPRIMA INSTRUMENTS LIMITED directly through the same page is recommended.

Does JENSPRIMA INSTRUMENTS LIMITED supply the innoSens 130 to international customers?

JENSPRIMA INSTRUMENTS LIMITED is a global supplier with documented target markets including the United States, the Middle East, Europe, and Southeast Asia. Specific shipping terms, lead times, and export documentation requirements should be confirmed directly with the company at the time of ordering.