Measurement parameters
Fluorine ion concentration: 0.1-10000mg/L
Feature
● Single channel measurement, need to select the corresponding sensor
● Wide power input, touch screen design
● 4.3" colour touch screen displays measured value, temperature and
relay status
● Chinese/English menu, easy to operate
● Password protection to prevent unauthorised operation
● New calibration step-by-step prompts can help reduce operating errors
● 2x programmable Hi/Lo relay outputs
● Programmable auto-purge relay outputs
● 2x isolated 4-20mA outputs
● RS485 Modbus RTU communication
● Data storage function, support for USB stick data expor
Features
Display: 4.3-inch color LCD touch screen display
Language: Chinese/English
Password: Setting Mode:0022,Calibration Mode:0011
Power supply: 110-240VAC, 50/60Hz; 24VDC optional
Current Output 1: Isolated 4-20mA output, setable measurement value, maximum load 500 Ω.
Current Output 2: Isolated 4-20mA output, measurable value can be set, maximum load 500 Ω.
Digital communication: RS485 Modbus RTU
Alarm Output: 2 programmable Hi/Lo contacts with hysteresis setting, 5A/250VAC/30VDC
Cleaning relay: cleaning interval: 0.1-1000h, cleaning time: 1-1000s
Operating temperature: -10~60.0°C
Storage temperature: -20~70.0°C
Protection grade: IP66
Installation: Wall mounted
Size: 200×180×90mm
Weight: Approx. 1Kg
innoSens 510 Fluoride Ion Electrode
JENSPRIMA's ionization electrodes are designed to be separated from the electrodes, so that the electrodes (electrode liquid and cap) can be effectively replaced. In this way, in the regular replacement of the electrode cap, electrode liquid, the electrode can be used repeatedly, so as to achieve the service life of the same type of products in the market can not be achieved. Note: If the electrode is left in the water for about 30 minutes, it is recommended to put the electrode back into the water to regenerate for 1 hour.
Fluoride ion selective electrode is a solid-state film electrode, the film material is mainly LaF3 single crystal, the film is surrounded by a special polymer.
Measurement parameters: Fluoride ion concentration
Measuring range: 0.1-10000mg/L
Slope: 57±2mV/p F-ion
Response time: <30s
Stability: ±0.3mV(30min), ±1mV(24h)
Interfering ions: OH-(pH>8), formation of HF and HF2-(pH<5) interfering ions and fluoride ions ratio generates 10% error
pH range: 5-8pH
Operating temperature: 0-40°C
Sensitive film: LaF3 single crystal
Case material: black plastic
Size: 12mm diameter, 100mm length
Installation: Flow-through tank/submerged installation, with optional reference electrode.
+44-203-7693048
