Free Chlorine Total Chlorine Analyzer
PACON 2501
Free Chlorine Total Chlorine Analyzer
FlumPANEL 2501
Dual-Parameter Water Quality Analyzer
Flumsys 10TC-F1P1
Water Quality Analyzer
Flumsys 10TC-F
Free Chlorine Controller
innoCon 6800CL
Free Chlorine Controller
innoCon 6501CL
Panel-mounted Online pH Analyser
pH/Redox Controller
innoCon 6800P
pH/Redox Controller
innoCon 6501P
The innoSens 850T low range turbidity sensor from our China factory ensures stable, high-precision measurement with anti-foam and anti-condensation functions. Contact the leading suppliers for industrial water quality solutions.
The innoSens 850T Turbidity Sensor is a high-precision optical measurement instrument specifically engineered for real-time water quality monitoring. By utilizing advanced light-scattering technology, the 850T delivers exceptional accuracy in detecting suspended solids and turbidity levels, making it an indispensable tool for industrial wastewater treatment and environmental monitoring systems.
Designed for durability and stability in harsh environments, this sensor integrates seamlessly with various water quality controllers. It ensures reliable data acquisition for critical processes, helping operators maintain strict compliance with environmental discharge standards while optimizing the efficiency of filtration and coagulation processes.
| Product Model | innoSens 850T | Sensor Type | Optical Turbidity Sensor |
|---|---|---|---|
| Measurement Principle | Light Scattering/Absorption | Application Area | Online Water Quality Analysis |
| Compatible Controllers | Turbidity/SS Controllers | Housing Material | Industrial Grade Corrosion-Resistant |
| Signal Output | Analog/Digital Interface | Installation Mode | In-line / Flow Cell |
| Calibration | Standard Reference Materials | Environmental Rating | IP68 Waterproof/Dustproof |
Built with high-grade materials to resist chemical corrosion and withstand extreme industrial water conditions.
Provides instantaneous turbidity data to allow immediate response to water quality fluctuations.
Advanced optical path design minimizes interference and maximizes detection accuracy for low-level turbidity.
Fully compatible with standard turbidity controllers and SCADA systems for centralized management.
Simplified cleaning process and stable calibration intervals reduce operational downtime and labor costs.
Offers versatile output signals ensuring seamless communication with various PLC and monitoring platforms.
Aggregate turbidity readings from multiple sensors into a single dashboard for facility-wide oversight.
Adjust sensor parameters and perform software-based calibration without needing physical site visits.
Instant notifications via SMS or email when turbidity levels exceed pre-set safety thresholds.
Historical data logging to analyze turbidity trends over time and predict maintenance needs.
Automatic tracking of sensor lifecycles to ensure spare parts and kits are available for replacement.
Auto-generate detailed water quality reports compliant with local and international environmental regulations.
| Metric | Traditional Sensors | innoSens 850T | ROI Benefit |
|---|---|---|---|
| Installation Cost | Moderate | Competitive | Comparable Entry |
| Maintenance Frequency | Monthly | Quarterly | 66% Labor Reduction |
| Measurement Accuracy | Standard | High-Precision | Reduced Fines/Risk |
| Operational Lifespan | Short/Medium | Extended | Lower Replacement Cost |
| Data Integration | Manual/Basic | Fully Automated | Higher Operational Efficiency |
The innoSens 850T is primarily used for the continuous monitoring of turbidity and suspended solids in industrial wastewater, drinking water treatment, and environmental water quality analysis.
While both measure particulates, the 850T focuses on optical turbidity (clarity), whereas Total Suspended Solids (TSS) sensors often measure weight per volume. The 850T provides a faster, non-destructive optical reading.
Yes, the sensor is designed for broad compatibility and can be integrated into most PLC and SCADA systems via standard analog or digital output signals.
Maintenance typically involves periodic cleaning of the optical windows to prevent biofouling or sediment buildup and occasional calibration checks using standard reference solutions.
Yes, the innoSens 850T is constructed with industrial-grade, corrosion-resistant materials specifically chosen for the demanding conditions of online water quality monitoring.
We recommend using our dedicated Turbidity/SS Controllers, which are optimized to process the 850T’s signal for maximum accuracy and ease of setup.
LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
Download
Video Center
Technical Services
FAQS
Service Network
Privacy Policy
Contact Us