Free Chlorine Total Chlorine Analyzer
PACON 2501
Free Chlorine Total Chlorine Analyzer
FlumPANEL 2501
Dual-Parameter Water Quality Analyzer
Flumsys 10TC-F1P1
Water Quality Analyzer
Flumsys 10TC-F
Free Chlorine Controller
innoCon 6800CL
Free Chlorine Controller
innoCon 6501CL
Panel-mounted Online pH Analyser
pH/Redox Controller
innoCon 6800P
pH/Redox Controller
innoCon 6501P
Looking for reliable China suppliers? Our factory provides the Flumsys 10TC-D2 Single Channel Digital Controller, featuring a 4.3 inch touch LCD to measure critical water quality parameters for industrial treatment with high precision.
The Flumsys 10TC-D2 is a professional-grade Dissolved Oxygen Controller engineered for high-precision water quality monitoring. Designed to meet the rigorous demands of industrial wastewater treatment and environmental monitoring, this controller provides real-time analysis and automated control of oxygen levels to ensure optimal aerobic processes and regulatory compliance.
Integrating advanced signal processing with a user-centric interface, the 10TC-D2 ensures seamless integration into existing PLC systems and SCADA networks. Its robust construction and high stability make it an ideal choice for sectors requiring constant, reliable dissolved oxygen measurement to prevent system failures and optimize chemical usage.
| Product Model | Flumsys 10TC-D2 | Measurement Type | Dissolved Oxygen (DO) |
|---|---|---|---|
| Control Mode | PID / On-Off Control | Input Signal | Analog/Digital Sensor Input |
| Output Signal | 4-20mA / RS485 Modbus | Display Type | High-Resolution Digital LCD |
| Power Supply | 100-240V AC / 24V DC | Protection Rating | IP65 / NEMA 4X |
| Operational Temp | 0°C to 60°C | Calibration | Automatic & Manual Calibration |
Built with corrosion-resistant materials to withstand harsh chemical environments in water treatment plants.
High-frequency sampling rates ensure immediate detection of oxygen fluctuations for rapid response.
Advanced noise filtration and temperature compensation for lab-grade accuracy in the field.
User-friendly LCD panel allows for quick parameter adjustment and system status diagnostics.
Configurable high/low limit alarms to prevent biological death in aeration tanks.
Standardized Modbus RTU communication for effortless connection to smart city or factory grids.
Efficiently manage sensor lifespan and replacement schedules across multiple sites.
Adjust slope and offset parameters remotely via the centralized control platform.
Receive SMS or email notifications immediately when DO levels breach critical thresholds.
Automatic archival of hourly and daily trends for environmental audit reports.
Synchronize data from various DO controllers into a single dashboard view.
Optimize blower operation based on real-time DO feedback to reduce electricity costs.
| Metric | Standard Controller | Flumsys 10TC-D2 | Improvement |
|---|---|---|---|
| Energy Waste | High (Constant Air) | Low (Demand-based) | 30% Reduction |
| Maintenance Cycle | Quarterly | Semi-Annual | 50% Less Downtime |
| Sensor Drift | Frequent | Minimal | Higher Stability |
| Response Time | Slow (Manual) | Instant (Auto) | Real-time Control |
| Compliance Risk | Moderate | Very Low | Zero Audit Failures |
By providing precise real-time dissolved oxygen data, the controller allows blowers to operate only when necessary, preventing over-aeration and significantly reducing electricity consumption.
The 10TC-D2 is designed with versatile input compatibility, supporting standard industrial DO sensors through analog 4-20mA or digital communication protocols.
Depending on water quality and fouling levels, calibration is typically recommended every 1-3 months. The 10TC-D2 simplifies this with a guided calibration menu.
Yes, the 10TC-D2 features RS485 Modbus RTU and 4-20mA outputs, making it fully compatible with all major PLC and SCADA brands for centralized automation.
The unit is rated IP65, meaning it is dust-tight and protected against water jets, ensuring reliable operation in humid plant environments.
The controller will trigger a relay output or send a signal to the blower/aerator to increase oxygen supply, while simultaneously triggering a low-limit alarm for the operator.
LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
LEARN MORE
Download
Video Center
Technical Services
FAQS
Service Network
Privacy Policy
Contact Us
